Normas
EN 353-2
Precio neto:
Pregunte el precioRef. no.:
AC011
Índice:
AC011_002_S/G|PL####
Marca:
PROTEKT
Protección para un peso máximo de usuario de 140 kg
Protección para 1 persona
VG11 11.075 para uso horizontal donde es probable una caída sobre un borde (R> 0.5)
Uso del dispositivo en vertical y horizontal
Mecanismo
Material:
acero cincado
Modelo de mosquetón:
Dimensiones:
130 x 57 mm
Apertura:
19 mm
Peso:
220 g
Resistencia estática:
20 kN
Tipo de bloqueo:
trinquete de bloqueo
Forma de montaje:
no separable
Material
Estructura:
acero
Acabado
Estructura:
galvanizado
Absorbedor de energía
Anchura:
32 mm
Material:
poliéster
The BLOCMAX guided type fall arrester with an anchor line is a component of
personal protective equipment against falls from a height. The equipment is compliant with EN353:2. The AC011 device is designed for use with 14 mm diameter polyester anchor lines (working ropes) designated by the part number AC100.
The AC011 device is designed to protect one worker with a maximum weight of 140 kg. The AC011 guided type fall arrester equipped with a flexible anchor line has been successfully tested in accordance with PPE-R/11.075 (which is not covered by CE marking regulations) for use horizontally when a fall over an edge may occur.
During testing, a steel profile with a radius of r=0.5 mm was used, with no sharp edges or burrs. This testing has proved that the equipment is suitable for use on similar edges, e.g. rolled steel profiles, wooden beams or rounded roof parapets. The device comes in different lengths, from 5 m to 100 m.
Conjuntos de aseguramiento
Dispositivos anticaídas retráctiles y deslizantes
Bloqueadores
AZ002
